Add:3th floor, building 5, xinhe
road,Hebei town,Baitian,
Longgang district,Shenzhen
Tel:0755-029021712
Mob:13802269377
13510750303
Ser:13826528967
Fax:0755-22143047
Email:smt@szdfk.com
Web:www.szdfk.com
PRODUCTS
The machine features:
More than 1, this machine adopts the unique even more cutting method, circuit board cut done by six pieces of blade, fluctuation two piece for a set of, constitute a cutting unit.1,2、3, the three groups.The whole cutting process is divided into three stages,1Set of blade cutting board first40%And then2The blade from again1The blade cut over in the tank, complete again40%Amount of cutting, and finally by3The last set of blade cutting20%And light, since each cutting quantity is small, so the cutting process of stress than traditional way of a cut is reduced80%Above, good circuit board edge segmentation level off is smooth, board face is very smooth, not twisted up.Is currently on the market only go after cutting aluminum plate can guarantee no deformation of the machine.
2, because of the multiple cutting, the cutting process is very smooth, greatly improving the V - their ability to localize the CUT slot even V - CUT slot shallow circuit board, also won't appear V - CUT slot from guide knife out, avoid adverse.
3, due to the blade cutting force is small, and Switzerland imports of high speed steel material, blade durability is greatly increased, split aluminum plate blade life can reach more than a year.
4, simple operation, quick speed.
5, circular knife can adjust up and down.
6, round knife can turn mill reoccupy many times.
Machine specifications:
Machine type V - CUT - C
Host size length X width X 1230 x600x430mm
After add platform size length X width X 2400 x600x430mm
The maximum points plate length is unlimited
Circuit board material:Aluminum plate, copper substrate,FR4Glass fiber board,
Plate speed 0 ~ 400 mm /seconds/s
Plate thickness 0.8 3.0 mm
Use voltage 220 v / 50 hz.40W
Machine 60 kg weight