Precision Thickness Gauge Model: DT-2000

JingMiXing thickness tester

A, technical parameters

Measuring principle ：Non-contact, laser line Accuracy of measurement：Plus or minus0.002mm
Repeated measurement accuracy:Plus or minus0.004mm The base size：324mmX320mm
The mobile platform：X，YElectromagnetic locking platform, fine-tuning the handle
Size of the mobile platform ：320mmX320mm The mobile platform trip：230mmX200mm
Imaging system：High-definition colorCCDcamera Optical magnification:25－110X (5Adjustable gear)
Measuring the light ：Can be as low as5(includingmHigh precision laser beam The power supply：95-265V AC, 50-60Hz
The system size：372(L)X557(W)X462(H)mm System weight：about30Kg(Contains no weight) Lighting system：High brightness ringLEDThe light source (Computer control brightness control)
Measuring software： DT-2000/SPC2000 (Windows 2000/XP)
Chinese simplified version, the English version

This machine is in U.S. manufacturing precision of the laser line generator and the thin line up to 5 microns thick brightness can be adjusted, the similar system is currently used the most fine laser line, ensure the measuring accuracy and stability.The software is in English, simplified Chinese.

Second, the areas of application:

Solder paste height measurements

Area, volume, distance, Angle, length, width, garden arc, irregular shape, etc. All geometry measurement

The thickness of the solder paste,PCBPlate printing ink, the line, welding plate height, size measurement, parts foot flatness measurement

Video capture, video processing, file management

SPC，CPK， CPStatistics, analysis, report output

Three, the basic configuration：

DT - 2000 host host control box

17 "LCD monitor to the PC host

The thickness of the school regular grid length school formal

U disk driver CD backup software driver

Four, the application background:

With SMT PCBA assembly of components is more and more small, the element density is more and more big, the solder joint is becoming more and more small.Defects in welded on the circuit board has 70%Actually came from the solder paste printing process control is not good enough.Solder paste thickness machine can be found in the printing process effectively potential adverse, provide effectiveSPCProcess control data, make the bad is greatly reduced.Combined with the current electronic manufacturing competition, the more defects means the loss of profits, and even lead to losses.A growing number of companies in the issuance of electronic manufacturing foundries, more and more strict with the quality process control, usually require contract have the equipment, have the ability to control the solder paste printing process.

JingMiXing solder paste thickness testerDT-2000Can also be used in other industries, and can measure the dimensions, geometric dimensions, such as circular arc, Angle, parallel lines, area, volume and so on.Such as measuring precision parts in the precision machinery industry, biological results analysis, the coagulum geometry size, etc.

Five, the solder paste thickness machine works

Non-contact laser thickness gauge linear beam of light produced by a dedicated laser is very fine, to stay at a certain Angle projection measurement target, because the target under test with the surrounding substrate height difference exists, the observed target and substrate laser beam corresponding appear discontinuous gap, according to the trigonometric function relationship can be observed with drop to calculate the target under test with the surrounding substrate height difference, so as to realize fast non-contact measurement.