Shenzhen Electronic Technology Co., Ltd.

Add：3th floor, building 5, xinhe
road,Hebei town,Baitian,
Longgang district,Shenzhen

Tel：0755-029021712

Mob：13802269377

13510750303

Ser：13826528967

Fax：0755-22143047

Email：smt@szdfk.com

Web：www.szdfk.com

PRODUCTS

Feida calibrator models: DK - 50

This product USES the CCD and high power magnifying glass, by observing the MONITOR incoming situation, plunger movement up and down, the abrasion of LEVER, reduce material adverse caused by material problem, to improve the SMT yield has very good help.
Features:
1. The operation is simple, concise and compact appearance.
2. X, Y, H three axis adopt high precision gear transmission, precise and reliable.
3. The magnification CCD, make the picture more clearly.
4. Equipped with standard straightedge to adjust the suction feeding center.
Configuration:
1 and 14 inch monitor
2. Cross the CCD 50 x zoom lens
Specifications:
1. Power supply: AC220 (50 hz)
2. The power rating: 20 w
3. Appearance size: 4. Weight: about 25 kg
The product installation:
1. Please install the display to the chassis, insert the CCD Out signal to the display of the VIDEO signal input interface.To monitor access to 220 v power supply.
2. Open the CCD and display power, at this time there will be cross cursor on display shows;If you don't show please check the power supply and signal lines are correct.
3. Adjust the display brightness and contrast to the display can be clearly.

Products use
1. Install the straightedge to rate one of the best in the production of a pasted on the FEEDER, place the FEEDER loading to the platform.
2. Adjust the focal length H axis holes in the position of monitor according to the FEEDER of absorb center, in the display on the intersection of cross cursor to be clearly visible and re-adjust the X, Y axis holes in the position of the suction FEEDER material center on display.
Above, please refer to!

>> Return