Add:3th floor, building 5, xinhe
            road,Hebei town,Baitian,
            Longgang district,Shenzhen

Tel:0755-029021712

Mob:13802269377

            13510750303

Ser:13826528967

Fax:0755-22143047

Email:smt@szdfk.com

Web:www.szdfk.com

PRODUCTS

type: DT - 8 k

Introduction of instrument:

The instrument is specially used for wave soldering machine, reflow solderinginLine type temperature measuring device with wave soldering, reflow soldering, dual function, has0.05S/channelTo 600S/channelbetweenThe miningsampleRate and recordAccording to the total 3.9 million pointsCan store an infinite set of curve data,, cooperatePCThe background analysis function of the software can be concerns about temperature curve and the production process;sixchannelThe on-line design,From an off-line analyzer.By electronic manufacturing enterprises are widely used in SMT and plug-insPCB Welding process,At the same time can also be applied to other temperature surveying and mapping industry

Areas of application:

Gauges the reflow soldering, wave soldering, tunnel furnace, and all kinds of oven temperature measuring instruments,

The instrument features:

One key operation, simple and convenient;

Human interface, powerful software analysis;

USB data transfer and USB charging;

The large capacity storage,recordAccording to the total 3.9 million pointsCan store continuously infinite set of curve data,

Design, low power consumption standby mode automatically switch power saving mode, can test using 5 hours continuously

Technical parameters:

Type no. :DT-8K

Test channels:8CH

Thermal couple:KType thermocouple

Sampling interval:0.05S/channel~~600S/channel

Record data: store according to total 3.9 million points, continuous recording can be infinite set of curve data

Accuracy of measurement:Plus or minus1(500℃)

Temperature range: 0 -500

Total energy rate: 100 mw or less

Operating voltage: 3.2 VDC (built-in explosion-proof rechargeable battery)

Points of distinguishing rate: 0.1 ℃ (full range)

Maximum bearing temperature: instrument internal temperature over 85 ℃, the instrument will automatically stop working

Connection mode: USB (mini - type B)

Exterior size: 220 mm (L) X 54 mm (W) X 12, 5 mm (H)

Heat insulation box size: 296 mm (L) X 75 mm (W) X 28 mm (H)

The software functions:

Compatible with the system:windowsxp/ windowsxp7

Language: three versions swaps (English, simplified Chinese, traditional Chinese)

Standard configuration:

1. A thermometer host 2. Heat insulation box of a 3. High temperature gloves, a pair of 4. A software installation CD

Article 5. 8 K type thermocouple 6. High temperature tape a roll of 7.USBThe charger a8The scissors a

9.A 10 miniUSB cable. The instruction for use a 11. The factory to prove a